Couple Small Projects in the Works

I just wanted to make a quick post about a couple small projects that I'm trying to knock out, before getting back to some of the older ones that have been languishing at 90% or better.  

The first are some Halloween beads.  I'm just waiting for Amazon to deliver some 3mm shock cord, so I can post some pics of the competed project.  

​Update 10/26/2024:  The Halloween beads are now uploaded on Printables and Makerworld:

https://makerworld.com/en/models/733981#profileId-665742

​https://www.printables.com/model/1052521-halloween-bracelet-and-necklace-beads

I'm also working on some new 1x5, 2x5 and 3x5 lidded bins with a latch.  I've so far just uploaded the 1x5 bin, which was added to the existing 1x bins on Printables.  Once they are all done, I will make sure they are also on Makerworld.

Finally, I have a small side project to replace a crappy attic access panel in a network closet (which was a piece of plasterboard) with an insulated plywood panel.  I added some simple handles and a pair of dogs to secure it.  The dogs have magnets which keep them stowed in the open position, so they don't flop around when the panel is removed.  I'm just gonna make up some spacers, so it can be a bit more universal, before I post it.  

Update - the Access Panel is now uploaded:
https://www.printables.com/model/1051531-attic-access-panel-handles-and-hatch-dogs

Update 11/2/2024:  The 1x5, 2x5 an 3x5 large lidded bins are uploaded, you can find them here:

1. 1x2, 1x3, 1x4, 1x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0
2. 2x2, 2x3, 2x4, 2x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0
3. 3x3, 3x4, 3x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0
4. 4x4, 4x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0