Getting Back to the "Generic Printer" Spares Case

I spent a couple hours today updating the last (unpublished) version of my "Generic Printer" spares case to the same spec as the Bambu X1/P1 spares case.  It had to be done in order to get the "Generic Printer" spares case closer to being released.  The updates were primarily to the base of the case, and will add cross compatibility with the larger bins (between the "Generic Printer" case design and the existing X1/P1 case designs).  That will also allow the use of some of the Bambu hotend holders in place of the bins, for users who use that type of hotend.  I don't currently plan other hotend holders for the case, but the blank modules will be available for remixing, when it is posted.  The image below shows the current 3mf layout.  I will need to test print the base again, as well as the bins (even though I already have a working case of the older design)

10/7/2025:  False start - Removed the link so I can update the design without any logos (hence the "Generic Case" name which I will probably need to change).  Once the model is cleaned up, it will be uploaded to printables instead of MakerWorld.

​10/11/2025:  Success! I had to fight with Printables site to get the description to pass their crazy "spam" filter, and then to get the 3mf profile to work (really odd problem where the profile would work in Orca, but when I uploaded and re-downloaded it, it failed).  Anyway, you can find it at the link below:
​
https://makerworld.com/en/models/1879290-printer-took-kit-v1-0#profileId-2012201

https://www.printables.com/model/1438284-printer-took-kit-v10