Gridfinity H2D Spares Bin

I decided to take some of the holders which were made for the H2D Spares Case, and use them for a Gridfinity H2D Spares bin design.  I like the way it turned out, but since I have no use for it, I'm not gonna test print it (but will post it in case somebody else would like to give it a try).  It will require (2) M3X10 SHCS, which are used to hold the cutter and wiper module in the bin.  It will also require either (4) 8x3 cylinder magnets, or an (4) 8x8x8 cube magnets, which are used to hold the hotends (however those magnets are optional). 

You can find the model here:

https://makerworld.com/en/models/1360047-h2d-gridfinity-spares-bin