I'm working on a couple new Gridfinity Bins with Dividers (and some updates)

This was sort'a side quest which was suggested by somebody over on Makerworld.  They had noted that it would be cool to have some dividers in the larger Gridfinity bins, and I thought it was such a cool idea, I decided to test it out. Something which I've never liked about bin dividers however, is that they tend to be loose and never really solidly held in place.  I'm hoping that the design I've come up with address that issue.  But because there are a ton of different sizes of the bins, I decided to take it slow (until I get some feedback on the design).  Right now, I plan to release a 2x2 and a 3x3 sized bins in 6U, 9U and 12U heights.  If they work well, I may add a divider option to other sizes of the bins (currently I have 1xn, 2xn, 3xn and 4xn sizes in the "standard" bins without dividers posted).  Unfortunately the existing "standard" bins will not be compatible with the divider system, since the bin bases and lids will be different.  I plan to keep the original bins up (without dividers), and make the bins with dividers a separate (but similar) project, since the dividers come with a cost.  The lids on the divider bins is several mm thicker, which will reduce the volume a bit.  I'm running a test print of the 3x3 prototype now, and then will try one of the 2x2 bins to see how it works.

I have several other large and interesting projects going as well, with three of them being tested currently by very helpful user on MakerWorld. That user suggested the ideas for a 3D printer filtering system, and has contributed time and material to help me test them.  Normally I print and test everything myself, but those projects involved printers (a P2S and P1S) and a filter which I do not own.  Those projects will not be posted until they are ready though, since the filtering system was just recently brought up, and it will take some time to get an idea how it works.  I'm also going to be restarting work on the Bento clone V2 update, now that I have found an ESP32 board which I think can handle non-pwm fans.  I'm waiting on the parts though, so hopefully there will be more on that later.

5/26/2026:  The 2x2 version of these bins with dividers has been posted to MakerWorld here:

https://makerworld.com/en/models/2839972-2x2-gridfinity-bins-with-latching-lids-dividers#profileId-3165833

I'm planning on releasing another version (which will be a 3x3) soon.