I've been finishing up work on a design for some H2C inductive hotend modules for my H2S/H2D case, as well as a few updates to the base design. The updates will include a new gasket, and some snap in latch parts (which will remove the need for four odd sized M3 screws). I may be adding a P2S option as well, but I don't own that printer, so will need help from the community to see that design though. The H2C update though is completed, and just needs to be fully test printed (so I can add one more Bambu spares case to my growing stack of spares cases :D
The pics below show some of the latest CAD models for the update, and some test parts I printed to verify the fit and function of the new snap in latch parts, and the H2C inductive hotend holders. The inductive hotend holders will require one 6x3 cylinder magnet per hotend (though those are also required for the existing H2D/H2S design as well).
The pics below show some of the latest CAD models for the update, and some test parts I printed to verify the fit and function of the new snap in latch parts, and the H2C inductive hotend holders. The inductive hotend holders will require one 6x3 cylinder magnet per hotend (though those are also required for the existing H2D/H2S design as well).
RSS Feed
