V3.2 Update In Progress for the 20 Bin Gridfinity Cases

I've been working on an update to the 20 Bin Gridfinity Cases as a side project.  The primary purpose of the update is to add snap in latch parts (which removes the need for several screws on every case).  The update will be incremental to v3.2, and I will leave an option to add screws in case somebody wants them.  Though the snap in latches have been working well in my H2/P2/X2 Spares Cases, without complaints.  

I'm also planning to add a couple design options for the top and base, with one being a hexagonal pattern which I used on my Generic Printer Spares Case, and another being just a plain full field contrasting color.  Like the v3.1 cases, these will be available in 6U, 9U, 12U and 15U sizes, with or without a TPU gasket.

Putting all the options together is gonna be a lot of work though.  I tackled the hardest ones first and am printing the hex patterned case now to test it.  The final design will have three separate profiles (one for each pattern option).  That's gonna be 27 different lids and bases which I need to set up in profiles, to cover all the options.  This should be fun.

Update 6/6/2026:  The profiles are mostly done now, but they have been a real pain due to various issues and a very slow PC that bogs down hard when I work with very large profiles and models in Bambu Studio.  I have to assemble my 2nd prototype and print a TPU gasket, to validate things one last time before I feel OK to post it.  It's getting close.