I'm still working on the enclosure for my CR10S Pro, but decided to make the Air Scrubber now since I think I may be able to use it without the enclosure (for the time being). The scrubber will use a HEPA filter for a vacuum cleaner and some granulated activated carbon made from coconut shells. I have seen several designs for scrubbers but for some reason they place the filter before the carbon. This filter will have the dirty air pass through some carbon granules and then through the HEPA filter before being exhausted. I am going to try to use a CPAP hose to suck the air from around the nozzle which I suspect could help keep the particulates down, even without an enclosure. The base is printing now (it is a 26 hour print), using a 0.6mm nozzle.
RSS Feed
