Montana State Trooper Wade Palmer is one of the guys risking his life in the video below, trying to help a woman and her kids who were broken down and then slammed into by an out of control 18 wheeler on an icy road.  Even after the accident, there are still cars sliding off the road and Palmer has to pull the hurt woman out of the way of another truck that nearly hits them both, thankfully everyone survived.  This guy and his partner are heroes, but what sucks is that Palmer was shot, and is now fighting for his life.  The full story is at the link below (also, there is a link in the article for his family's gofundme - edit - the link for gofundme at missoulian.com no longer works):
https://missoulian.com/news/local/wounded-missoula-trooper-had-won-medal-of-valor-for-his/article_51335173-bad4-5e57-b6a0-a09289216c47.html

UPDATE Apr 2, 2019 and Apr 16, 2019 - good news, but still a long road to recovery:
https://www.missoulacurrent.com/general/2019/04/trooper-palmer-consciousness/
https://missoulian.com/news/state-and-regional/crime-and-courts/montana-trooper-wounded-in-shooting-interacts-from-hospital-bed/article_fa363d98-0e36-581a-8c34-2e98a18ad83d.html

New Update and even better news.  It's still a long road, but his recovery seems really amazing:
https://www.ktvq.com/news/montana-news/montana-trooper-wade-palmer-continues-recovery-following-march-shooting
Newer:
https://www.greatfallstribune.com/story/news/2020/07/20/critically-injured-montana-highway-patrol-trooper-receives-medical-retirement/5475332002/

newstalkkgvo.com/hero-highway-patrol-trooper-wade-palmer-announces-his-retirement/

My PC stopped working, and so I thought, since it is a small form factor PC and hard to work on, that it would be a good time for some upgrades since I had to take it apart anyway.  Well that was not as easy as I had hoped.  I needed to upgrade my M.2 drive and I also had a larger hard drive which I wanted to stick in the PC (an 8TB drive schucked from a USB enclosure).  It was anything but simple and I probably have had to take apart the PC about a dozen times by now and am still not done.  Normally to swap the system drive, or really any drive, I would use Macrium Reflect to clone it.  The problem is, I was running Windows 7 and (I later learned), it does not have native support for M.2 NVME drives which of course was what I bought to upgrade since my motherboard supports them.  I read that there was a Microsoft hot fix for windows 7 to add NVME support, but it appeared to be pulled sometime and I recall seeing something to the effect of, it is available with 10, so just upgrade.  Well luckily, when they were giving it away, I was able to upgrade to 10, so the hardware "hash" of my PC would be saved for a later upgrade, so that was in the bag. 

Problem is, before I found this out, I thought the clone or partitions were the problem, and wasted a long time before realizing it was a driver problem (windows would half boot up but fail during the splash screen).  Then I spent time searching for a driver from the M.2 manufacturer (doesn't seem to exist), and then I found a possible workaround which was more trouble that it was worth and so I just upgraded to 10 (which is simple).  I suspect that if I had bought a Samsung NVME I may have been better off, but oh well.  The worst part is that M.2 drives are often mounted in the most inaccessible placed on motherboards, and mine was on the back, which meant a full tear down each time I had to try something new (meh).

However even after going to 10, in order to get the driver on the image I would use with the new M.2 NVME drive, I had to:

1. clone my original M.2 SSD over to an external drive
2. install my new M.2 NVME, and boot off the cloned external drive
3. once I confirmed that windows 10 could see the NVME drive (in disk management), I created an image of the external boot drive
4. imaged that onto the NVME which I could use to then run windows 10 from. 

I recall seeing a similar post on Reddit I think, with this same process (in a nutshell).  And it made sense because I think Windows would need to have the NVME driver loaded on the image being used with it and this process does that.

And after all that, my CPU fan crapped out so I had to kludge a small fan together for that while I wait for a replacement. 

But I could not leave it well enough alone, I cracked open an external USB hard drive to use it as an internal drive.  And then found that drive is one that uses a 3.3V reset pin on the SATA power connector, so had to block that pin with some kapton tape which is a simple mod to make them work with power supplies that include 3.3V on the SATA power connectors.

Finally, I am starting to worry about my graphics card which seems to be running quite hot... so I had to turn up the fan using wattman (default profile was not keeping it cool). 

My PC is still in parts but it is all nice and clean now, and the extra storage will really help though.  I'm not super stoked to be using Windows 10, but it was inevitable if I keep using windows that I would need to downgrade to it.  Once I get my PC back together I can start to catch up on things.  Due to the PC problems and other issues, it feels like I have been camping for the past several weeks with no PC to use.  At least my hard drives did not crap out though, but it has me thinking about a better backup solution.