Update 10/8/2022: Printed the base and it looks good, the button operation works well so I think it should be good (but I still need to print the bezel).
The LCD Case Mod by "Spaghetti-Bolognese" on Github adds a small button over the E-stop button (among other things). It looks like the Voron design has changed a bit since that was made however, since the screen now has a bezel which covers the screws. I wanted the button however, so I remixed the model and used the Voron R2.4 STEP files to make two versions. One fully covers the scree bezel (which was a bit of a hack), and another version is pretty much stock, aside from the button. Both will require some more supports, and I will not post them until I can test the files. I plan to print and use the fully covered screen version since I have zapped too many things to count, and previously had to replace the screen on my delta due to zapping the metal screen bezel. Update 10/8/2022: Printed the base and it looks good, the button operation works well so I think it should be good (but I still need to print the bezel). I made a change to the version which covers the metal bezel, it will now print flat, as nature intended. I also made a slight adjustment to the location of the button which will require reprinting the part shown above... unfortunately I'm used to that sort of thing though. I finished the design and have it printed, but it is not yet uploaded.
0 Comments
Leave a Reply. |
Stoopid MeWelcome to my Stoopid corner of teh Internet. It's mostly gonna be 3D printing stuff, but I also post some recipes, projects, and the occasional rant here as well. More Stoopid stuff is updated regularly. Archives
October 2024
Categories |