 |  |  |
Posted a couple new things to Thingiverse.com recently, the one above is a small magnetic pickup tool for my Stanley Screw Organizer Case. It uses a 5x15mm cylinder neodymium magnet and fits in the compartments of the organizer. Seems to work pretty well.
Also posted are some screw covers designed for #8 screws. I designed them to use M5 washers as well and the covers snap on the base thanks to a very small ridge that locks them on. These were printed in PETG which I hope will stand up in the weather.
Also posted are some screw covers designed for #8 screws. I designed them to use M5 washers as well and the covers snap on the base thanks to a very small ridge that locks them on. These were printed in PETG which I hope will stand up in the weather.
 |  |
I'm also working on a remix of T77Chevy's "filament guide cr10s pro" which looks perfect, except that I need a larger diameter wheel on my printer since the filament path goes almost straight up to the top of the enclosure. The model I am working on will have a 45mm wheel and a will have a version with M4 hardware and one with no screws needed. It should be posted soon, I just need to print it. My current filament guide has served well, but it is warping from the stress and it's time to replace it.
 This is the old filament guide which is a bit bent. It has worked OK, but my printer needs a larger diameter wheel for the guide. |  This is the Remix design which will have a larger 45mm diameter roller. |
Update 8/29/2020 - The filament guide for the CR10S Pro is now posted here. Pics of it in action are below.
RSS Feed
