This one may not see the light of day, but it was a request from a family member who needs a short extension that will allow using a Dyson DC35 from their wheelchair. This is about a 400mm extension, and is based on Davoque's "Dyson DC31 rigid extension tube connectors", which unfortunately does not fit the DC35. It's not really a remix since I modeled all the parts, but I did pull some dimensions from that design. I'm going to print it in PETG and the plan is to glue it together.
Update - this works, though it is a bit loose (but so are the stock nozzles). I think with a longer arm the looseness seems more apparent, though it's not that bad. I could probably tighten the dimensions for the connections up by less than a mm, and it would be fine.
Update - this works, though it is a bit loose (but so are the stock nozzles). I think with a longer arm the looseness seems more apparent, though it's not that bad. I could probably tighten the dimensions for the connections up by less than a mm, and it would be fine.
RSS Feed
