The mount I have designed will replace the fan guard / BL-Touch mount on my Hydra Remix. The design will have a screw lock to secure the camera which is aimed at the nozzle on my MicroSwiss hot end. I'm also trying to add some wire management to the remix (on the BMG mount). Still a work in progress, but I will post it up if it works.
The Hydra Remix I made for my CR10S Pro has been working great, I should have done this earlier, but I could have done without the unrelated bed warping. I'm still needing to work on wire management though and since I recently bought a USB endoscope camera, which is pretty much plug and play with the Raspberry Pi (I had to set camera=auto in Octoprint.txt), I decided to make a mount for it. The camera quality is decent in testing, and the USB plug is a bit hard to get in and out, but it has a brightness control and should do the job. This one has a rather stiff wire, which I'm not sure will be a positive or negative until I put it to use.
The mount I have designed will replace the fan guard / BL-Touch mount on my Hydra Remix. The design will have a screw lock to secure the camera which is aimed at the nozzle on my MicroSwiss hot end. I'm also trying to add some wire management to the remix (on the BMG mount). Still a work in progress, but I will post it up if it works.
0 Comments
Leave a Reply. |
Stoopid MeWelcome to my Stoopid corner of teh Internet. It's mostly gonna be 3D printing stuff, but I also post some recipes, projects, and the occasional rant here as well. More Stoopid stuff is updated regularly. Archives
December 2024
Categories |