It's been busy this past week, so I have gotten behind again on projects, but I'm gonna try and get the Gridfinity Box For Stuff printed. My prototype will have an updated label design, which will not require supports. There is also gonna be an optional gasket version which will use a printed TPU gasket. This gasket version may be released later though, depending on how things go with the prototype, since the Gridfinity version requires that the mating surfaces are at an angle (and I don't know how well the gasket will fit).
Update 11/16/2023 - I've printed this 1.5 times and have pretty much garbage to show for it. I switched out the nozzle for an aftermarket V2.0 hotend and am testing that out, before I try it again. I'm also switching to PLA, which I think may be a bit more forgiving, since part of the issue is that I need a clean groove for the gasket in order to test the fit. This is gonna be a bit longer to post.
UPDATE 1/12/2024: It's (finally) posted on Printables, you can find it here:
https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs
https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs
RSS Feed
